Numerical simulation of heat transfer and fluid flow of molten metal in MMA–St copolymer lost foam casting process

In this study, a computational fluid dynamics (CFD) code was developed to calculate the filling pattern using volume of fluid (VOF) algorithm with donor–acceptor method for free surface simulation. This algorithm has been modified to include the pressure of the gas produced from foam degradation. For this purpose a heat transfer model and 2D foam degradation model were developed. In heat transfer model, radiation and conduction between foam and molten metal; and convection between gas and molten metal were considered. In order to evaluate the results of simulation, a bench scale casting apparatus was assembled and the casting was conducted in a transparent mold. The effect of several parameters such as coating thickness, foam density and vacuum level on the gap temperature, gap pressure and filling speed was studied with the developed software. It was found that the simulated results are in good agreement with experimental results.     

Benefits valuation of potable water quality improvement in Malaysia: the case of Kajang Municipality

This article estimates the benefits of potable water quality improvements in Kajang Municipality in the state of Selangor, Malaysia, using the avertive cost method. Households were willing to pay MYR 322 annually to improve potable water quality. This represents about 80% of their average annual water bill. The present value of aggregate benefits over a period of 30 years at various social discount rates ranged from MYR 301 million to MYR 768 million. These estimates can be used as a reference for public investment criteria. The findings suggest that there is merit in an upward revision of water tariffs if they provide improvements in water quality.     

Artificial neural network application of modeling failure rate for Boeing 737 tires

This paper presents an application of artificial neural network (ANN) technique for conducting the reliability analysis of Boeing 737 tires. For this purpose, an ANN model utilizing the feed‐forward back‐propagation algorithm as a learning rule is developed. The inputs to the neural network are the flight operational time and the number of landings as independent variables and the output is the failure rate of the tires. Two years of data are used for failure rate prediction model and validation. Model validation, which reflects the suitability of the model for future predictions, is performed by comparing the predictions of the model with that of Weibull regression model. The results show that the failure rate predicted by the ANN is closer in agreement with the actual data than the failure rate predicted by the Weibull model. The present work also identifies some of the common tire failures and presents representative results based on the established model for the most frequently occurring tire failure. Copyright © 2010 John Wiley & Sons, Ltd.     

Job stress and job performance controversy revisited: An empirical examination in two countries.

This study examined the relationship between the measures of job stress and job performance among employees working in a large North American-based multinational corporation in Malaysia (N = 305) and Pakistan (N = 325). Data were collected by means of a structured questionnaire from employees on job stress and turnover intention. Job performance and absenteeism data were obtained from the company's records. In both countries, data were more supportive of the negative linear relationship between stress and performance than other types of relationships. Overall, 90% of comparisons supported the negative linear relationship, whereas a u-shaped/curvilinear relationship was supported in 10% of instances. Implications of the findings are discussed for future research. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Stability and Erosion in Grassed Channels

Grass is a cost-effective form of erosion control. Since grass prevents erosion, the relationship between grass properties and erosion rate in grassed open channels is highlighted and analyzed within the context of channel stability. The deformation of grass caused by the flow’s momentum has been taken into consideration. Results are in good agreement with the available experimental erosion rate data for grassed channels. The purpose of this paper is to show that the amount of deformation of a grass channel lining due to flow can be used to estimate the erosion rate, and, as a result, lining deformation can be used as an indicator of channel stability. The method is simple enough to be useful for design.     

Electrochemical investigations of pitting corrosion behaviour of type UNS S31603 stainless steel in thiosulfate-chloride environment

The pitting corrosion behaviour of type UNS S31603 stainless steel (316L SS) in 0.01, 0.05 and 0.1 M thiosulfate ion (S₂O₃ ^2–) in the absence and presence of various concentrations of chloride ion (Cl^–) was studied using the cyclic potentiodynamic polarization method. The influence of major factors which affect pitting corrosion such as pH and temperature, were also investigated. It was found that both the pitting potential (E _pit) and the repassivation potential (E _rp) decreased with increase in Cl^– concentration and solution temperature and a more pronounced difference in E _pit values for various concentrations of S₂O₃ ^2– in 1.0 M Cl^– was obtained at lower temperatures. The effect of pH on E _pit, E _corr and E _rp values for different concentrations of S₂O₃ ^2– in the presence of 1.0 M Cl^– was also determined.     

Low-bias performance of avalanche photodetector. A time-domainapproach

The performance of the InP-InGaAs avalanche photodiode (APD) at low bias voltages has been investigated directly from its impulse response without using any fitting parameters. The important mechanisms responsible for low-bias performance are the emission of holes from the InP-InGaAs interface potential-trap in the valence band, the velocity of the carriers, and the diffusion of photogenerated holes from the undepleted region to the depleted region of the absorption layer. A time-recurrence relation for the emission of holes from the trap has been derived and special attention has been paid to the velocity of carriers at low fields. The delay in the process of diffusion of photogenerated holes has been taken into account in obtaining the impulse response. The bandwidth at different gains have been calculated by taking the fast Fourier transform (FFT) of the current impulse response. The gain-bias and gain-bandwidth characteristics show reasonably good agreement between the data from the model and the experimental data of an earlier published work on InP-InGaAs APD     

Assessment of impact of AICTE funding on R&;D and educational development

Summary An analysis of 330 questionnaires received from project investigators funded by AICTE indicates that project investigators preferred to present their research results at conferences rather than in national and international journals. Impact of funding has been better on human resource capability development as compared to research and technological output. Analysis of data using data envelopment analysis indicates that projects funded under electronics and communication engineering, mechanical engineering, electrical engineering and management displayed some consistency and uniformity with regard to impact on various output parameters.     

The structure and properties of PEDOT synthesized by template-free solution method

In this study, a simple one-step template-free solution method was developed for the preparation of poly(3,4-ethylenedioxythiophene) (PEDOTs) with different morphologies by adjusting various ratios of oxidant (FeCl₃·6H₂O) to monomer (3,4-ethylenedioxythiophene (EDOT)). The results from structural analysis showed that the structure of PEDOT was strongly affected by the oxidant/monomer ratio, and the polymerization degree, conjugation length, doping level, and crystallinity of PEDOT decreased with increasing of the oxidant/monomer ratio. The morphological analysis showed that PEDOT prepared from an oxidant/monomer ratio of 3:1 displayed a special coral-like morphology, and the branches of ‘coral’ would adjoin or grow together with increasing content of oxidant in the reaction medium; consequently, the morphology of PEDOT changed from coral to sheets (at an oxidant/monomer ratio of 9:1). The electrochemical analysis proved that the PEDOT prepared from an oxidant/monomer ratio of 3:1 had the lowest resistance and the highest specific capacitances (174 F/g) at a current density of 1 A/g with a capacity retention rate of 74% over 1,500 cycles, which indicated that the PEDOT with a coral-like morphology could be applied as a promising electrode material for supercapacitors.     

A facile solid-state heating method for preparation of poly(3,4-ethelenedioxythiophene)/ZnO nanocomposite and photocatalytic activity

Poly(3,4-ethylenedioxythiophene)/zinc oxide (PEDOT/ZnO) nanocomposites were prepared by a simple solid-state heating method, in which the content of ZnO was varied from 10 to 20 wt%. The structure and morphology of the composites were characterized by Fourier transform infrared (FTIR) spectroscopy, ultraviolet-visible (UV-vis) absorption spectroscopy, X-ray diffraction (XRD), and transmission electron microscopy (TEM). The photocatalytic activities of the composites were investigated by the degradation of methylene blue (MB) dye in aqueous medium under UV light and natural sunlight irradiation. The FTIR, UV-vis, and XRD results showed that the composites were successfully synthesized, and there was a strong interaction between PEDOT and nano-ZnO. The TEM results suggested that the composites were a mixture of shale-like PEDOT and less aggregated nano-ZnO. The photocatalytic activity results indicated that the incorporation of ZnO nanoparticles in composites can enhance the photocatalytic efficiency of the composites under both UV light and natural sunlight irradiation, and the highest photocatalytic efficiency under UV light (98.7%) and natural sunlight (96.6%) after 5 h occurred in the PEDOT/15wt%ZnO nanocomposite.